|
|
|
Arpolube Industrial/Commercial Oils
|
ARPOLUBE HIGH TEMP CHAIN LUBRICANT
- 100% SYNTHETIC.
- WIDE TEMPERATURE RANGE.
- VIRTUALLY ELIMINATES CARBON DEPOSITS.
- EXCELLENT LOAD CARRYING AND WEAR PREVENTION PROPERTIES
- THE MOST EFFECTIVE HIGH TEMP CHAIN LUBRICANTS DEVELOPED TO DATE.
ARPOLUBE PERFLUORINATED GEAR OILS
- A COLORLESS LOW, MOLECULAR WEIGHT OIL WHICH IS INERT TO VIRTUALLY ALL CHEMICALS.
- SAFE TO USE IN INDIRECT CONTACT WITH OXIDANTS SUCH AS LOX/GOX AND CHLORINE.
- NON FLAMMABLE AND NON TOXIC
- LACTICS, AND ELASTOMERS.
ARPOLUBE HYDRASYN OILS
ARPOLUBE HYDRASYN OILS ARE AMONGST THE FINEST ANTI-WEAR SYNTHETIC
HYDRAULIC FLUIDS AVAILABLE IN THE MARKET TODAY. INCORPORATING THE
LATEST IN PAO AND ESTER TECHNOLOGY, THESE FLUIDS HAVE BEEN DESIGNED FOR
USE IN HYDRAULIC SYSTEMS OPERATING OVER A WIDE TEMPERATURE RANGE.
COMMON PETROLEUM BASED FLUIDS MAY NOT PROVIDE ADEQUATE HIGH/LOW
TEMPERATURE PERFORMANCE, NOR DO THEY PROVIDE THE LEVEL OF FIRE SAFETY
THAT ARPOLUBE HYDRASYN FLUIDS ARE CAPABLE OF.
APPLICATION:
ARPOLUBE HYDRASYN OILS WERE DEVELOPED SPECIFICALLY FOR USE WITH GEAR,
PISTON OR VANE PUMPS OPERATING OVER A WIDE RANGE OF PRESSURES AND
TEMPERATURES. THEY MEET VICKERS 104C VANE PUMP PERFORMANCE
REQUIREMENTS.
IMPROVED PERFORMANCE:
APROLUBE HYDRASYN OILS WERE DESIGNED TO OPERATE OVER A WIDE RANGE OF TEMPERATURES AND PRESSURES WITH LESS CHANGE IN VISCOSITY THAN COMPARABLE PETROLEUM BASED FLUIDS. THIS RESULTS IN REDUCED ENERGY
CONSUMPTION, EXTENDED PUMP LIFE AND IMPROVED OVERALL PERFORMANCE.
INCREASED SAFETY:
LOW VAPOR PRESSURE DECREASES VAPOR LOSS, REDUCES DEPOSITS AND DRAMATICALLY LOWERS FIRE HAZARD. THESE OILS HAVE EXCELLENT SEAL, JACKET AND HOSE COMPATIBILITY, AND REDUCE RISKS ASSOCIATED WITH LEAKS.
REDUCED MAINTENANCE COSTS:
ANTI-WEAR ADDITIVES REDUCE PUMP WEAR. CORROSION INHIBITORS AND EXCELLENT DEMULSIBILITY RESULT IN LONG COMPONENT LIFE. MAINTENANCE COST ARE FURTHER REDUCED AS A RESULT OF EXCEPTIONAL OXIDATION STABILITY WHICH AFFORDS FLUID LIFE UP TO EIGHT TIMES THAT OF PETROLEUM OILS.
ARPOLUBE SUPER MULTI-PURPOSE E.P. GREASE
ALU-PLEX GREASE NO. 2
- A WIDE APPLICATION RANGE GREASE SUITABLE FOR VARYING APPLICATIONS AND A WIDE OPERATING RANGE.
- PASSES AND EXCEEDS G.M.'S HIGH TEMPERATURE WHEEL BEARING TEST.
- LONGER LASTING, EXTENDS TIME INTERVALS BETWEEN APPLICATION.
- HIGH HEAT RESISTANCE UP TO 400 DEGREES F.
- TYPICAL DROPPING POINT 525 DEGREES F.
- EXTREME PRESSURE - TIMKEN OK LOAD 65 LBS.
- HIGHLY RESISTANT TO WASHING ACTION OF WATER.
- SPECIAL WEAR RESISTANT ADDITIVE FORMS A PLATING ACTION TO REDUCE FRICTION AND WEAR TO A MINIMUM.
- GOOD COMPATIBILITY WITH ALL EXCEPT SODIUM BASE GREASE.
- EXCELLENT OXIDATION RESISTANCE.
- NON-CORROSIVE.
- LOW TEMPERATURE PUMPABILITY.
- SUPER RESISTANT TO HEAT, SHOCK LOADS AND WATER.
- REDUCES WEAR AND EXTENDS BEARING LIFE.
- USED IN OPERATING TEMPERATURES FROM 0 TO 400 DEGREES F WITHOUT FEAR OF SLUDGING, GUMMING OR HARDENING.
USES:
KNOWN IN THE UNITED STATES BY ITS DISTINCTIVE RED COLOR, THIS PRODUCT HAS GAINED WIDE ACCEPTANCE IN AUTOMOTIVE, MARINE, FARM, CONSTRUCTION, MINING, TRUCKING AND INDUSTRIAL APPLICATIONS.
USED IN TEXTILE PLANTS, PAPER MILLS, CHEMICAL PLANTS, RUBBER PROCESSING PLANTS, CONVEYORS, MINING OPERATIONS, PLAIN ANTI-FRICTION BEARINGS, COMMERCIAL LAUNDRIES, WATER EXTRACTORS, DRYING EQUIPMENT AND PUMPS.
ARPOLUBE NUCLEAR CONTROL HYDRAULIC FLUID
- APPROXIMATELY ISO VG 68 HYDRAULIC FLUID BASED UPON A POLYALPHAOLEFIN SYNTHESIZED HYDROCARBON. DEVELOPED AS AN ASHLESS, RUST AND OXIDATION INHIBITED, ANTI-WEAR HYDRAULIC FLUID
- PERFORMS SATISFACTORILY IN RADIATION DOSES UP TO 200 MILLION RADS, WITH 55 MILLION RECOMMENDED.
- WILL NOT HYDROLIZE OR REACT WITH NORMAL METALS.
- COMPATIBLE WITH BUNA N (NITRILE TYPE) AND FLUOROCARBON BASED MATERIALS.
ARPOLUBE DSS-1 DIESEL SMOKE SUPPRESSANT
AN ASHLESS DISTILLATE FUEL TREATMENT FOR IMPROVING EMERGENCY DIESEL GENERATOR EFFICIENCY AND REDUCING EMISSIONS.
DSS-1 DIESEL FUEL ADDITIVE CONCENTRATE PROVIDES THE FOLLOWING BENEFITS WHEN USED AS DIRECTED IN A COMPREHENSIVE FUEL MAINTENANCE PROGRAM:
- REDUCES OR ELIMINATES SMOKE.
- MINIMIZES PARTICULATE EMISSIONS.
- PROMOTES CLEANER BURNING AND BETTER ENGINE IGNITION.
- REDUCES AND CONTROLS ENGINE COMBUSTION AREA DEPOSITS.
- REDUCES FUEL SYSTEM FILTER PLUGGING.
- IMPROVES FUEL COMBUSTION EFFICIENCY.
- CONTROLS RUST AND CORROSION IN ALL FUEL SYSTEMS.
- STABILIZES FUEL AND RETARDS OXIDATION.
- DISPERSES FUEL INSOLUBLES AND ELIMINATES SYSTEM SLUDGE.
- DEMULSIFIES MOISTURE FROM FUEL.
- REDUCES MAINTENANCE COSTS AND EQUIPMENT DOWNTIME.
DSS-1 CONTROLS DIESEL ENGINE COMBUSTION SMOKE WHILE EFFECTIVELY REDUCING DIESEL EQUIPMENT OPERATION PROBLEMS CAUSED BY POOR QUALITY DISTILLATE FUELS, FUEL OILS, AND GAS OILS.
USAGE OF DSS-1 IS THE MOST COST EFFECTIVE WAY DIESEL EQUIPMENT OPERATORS HAVE TO DEAL WITH TODAY'S POOR QUALITY DIESEL FUEL AND TO REDUCE EMISSIONS. USAGE OF THIS PRODUCT TYPICALLY SAVES APPROXIMATELY $2.00 FOR EVERY $ 1.00 INVESTED IN THE PRODUCT.
USED IN DIESEL EMERGENCY GENERATORS, RAILROAD AND MARINE DIESELS AS WELL AS ALL OTHER DIESEL ENGINE APPLICATIONS. FORMULATED TO TREAT 1000 GALLONS OF FUEL WITH ONE GALLON OF PRODUCT.
ARPOLUBE SYNTHETIC 2 CYCLE OIL
FORMULATED TO MEET THE UNIQUE LUBRICATION REQUIREMENTS OF ALL AIR AND WATER COOLED 2-CYCLE ENGINES, THIS SUPERIOR SYNTHETIC PROVIDES ULTIMATE LUBRICATION AGAINST FRICTION CORROSION AND CARBON DEPOSIT BUILDUP. THE PRODUCT PROMOTES CLEAN, CONTROLLED AND MORE EFFICIENT COMBUSTION.
CONTINUED USAGE OF ARPOLUBE SYNTHETIC 2 CYCLE OIL LEADS TO INCREASED SPARK PLUG LIFE, REDUCTION OF EXHAUST SMOKE, AND MORE THOROUGH MIXTURE WITH GASOLINE AT LOW TEMPERATURES. IT PROVIDES THE RIGHT BALANCE OF LUBRICATION AND COMBUSTION EFFICIENCY BY LOWERING AND STABILIZING CYLINDER HEAD TEMPERATURES AND REDUCING CARBON DEPOSITS THAT ROB ENGINES OF THEIR PERFORMANCE.
USES:
- AIR AND WATER COOLED 2 CYCLE MOTORCYCLES AND ATVS.
- MOPEDS, SCOOTERS AND GO CARTS.
- WATER COOLED MARINE OUTBOARDS AND PERSONAL WATER CRAFT.
- SNOWMOBILES AND SNOW BLOWERS.
- CHAIN SAWS, LAWN MOWERS WEED EATERS AND BLOWERS.
BENEFITS:
- LOW ASH.
- RUNS COOLER, LESS FRICTION.
- MAINTAINS HIGHER FILM STRENGTH TO FIGHT FRICTION AND WEAR.
- REDUCED OXIDATION CORROSION AND CONTAMINATION.
ARPOLUBE 21 SYNTHETIC HEAVY DUTY FLEET LUBRICANT
DRAWING ON OUR DECADES OF EXPERIENCE WITH SYNTHETIC LUBRICANTS, WE HAVE FORMULATED A UNIQUE MULTI-FACETED LUBRICANT FOR AUTOMOTIVE AND TRUCK APPLICATION. WE BELIEVE THAT THIS OIL IS FAR SUPERIOR TO ANYTHING CURRENTLY ON THE MARKET.
BENEFITS:
- FUEL SAVINGS OF 5 TO 9 PERCENT.
- ON TRUCKS WITH BYPASS OlL FILTERS, OlL CHANGE INTERVALS HAVE EXCEEDED 6O,000 MILES DEPENDING ON AMOUNT OF MAKEUP OIL ADDED.
- ONE GRADE OF OlL CAN BE USED IN WINTER AND SUMMER SERVICE.
- LESS WEAR IN ENGINES, TRANSMISSIONS AND FINAL DRIVES, EXTENDING SERVICE LIFE OF THESE COMPONENTS.
- EASIER TRANSMISSION SHIFTING, ESPECIALLY IN THE WINTER.
ARPOL TRANSFORMER OIL 180
- AN ELECTRICAL INSULATING OIL DESIGNED TO GIVE SUPERIOR PERFORMANCE IN TRANSFORMERS, SWITCHGEAR AND X-RAY EQUIPMENT.
- CONTAINS NO PCBS.
- MEETS ANSI/ASTM D-3487 AND NEMA TR-P8-1975 TYPE I REQUIREMENTS. IT IS UNINHIBITED FOR USE WHERE ITS NATURAL OXIDATION RESISTANCE IS SUFFICIENT
- RESISTS FORMATION OF ACID AND SLUDGE WHICH CAN SHORTEN EQUIPMENT LIFE
- EXCELLENT ELECTRICAL PROPERTIES FOR THE SEVERE REQUIREMENTS OF ELECTRICAL EQUIPMENT
ARPOLUBE 2812
AN SAE 10 (ISO-32), 100% SYNTHETIC COMPRESSOR LUBRICANT, FULLY FORMULATED FROM THE HIGHEST QUALITY DIESTER BASE FLUIDS. RECOMMENDED FOR USE IN FLOODED ROTARY VANE AND SCREW TYPE AIR COMPRESSORS WHERE A FLUID OF THIS VISCOSITY IS REQUIRED.
PERFORMANCE BENEFITS
- HIGHER COMPRESSOR EFFICIENCY
- REDUCED SYSTEMS DEPOSITS
- LOWER ENERGY COSTS
- LONGER LUBRICANT SERVICE LIFE
- HIGHER COMPRESSOR RELIABILITY
- SAFER COMPRESSOR OPERATION
APPLICATION
- CIRCULATING AND SPLASH LUBRICATED ROTARY COMPRESSOR SYSTEMS
- AIR LINE OILERS SERVING VALVES/CYLINDERS ON PNEUMATIC EQUIPMENT
- GEAR, BEARING, HYDRAULIC AND CHAIN APPLICATION OPERATING BEYOND PETROLEUM OIL CAPABILITIES
PRODUCT FEATURES
- CLEAN OPERATION-LOWEST DEPOSIT FORMING TENDENCIES
- EXTENDED LUBRICANT LIFE-EXCELLENT HIGH TEMPERATURE STABILITY
- LONG BEARING LIFE-SUPERIOR ANTI-WEAR PERFORMANCE
- LESS MAINTENANCE-EXCELLENT RUST AND CORROSION PROTECTION
- WIDE TEMPERATURE RANGE-HIGH FLASH AND FIRE POINTS, LOW POUR POINT
- LESS OIL CONSUMPTION-VERY LOW VOLATILITY
- HIGH SEPARATION EFFICIENCY-EXCELLENT DEMULSIBILITY CHARACTERISTICS
- EXTENDED LIFE -AIR/OIL SEPARATOR ELEMENTS
- APPROVED BY USDA FOR H-2 (FORMERLY BB) SERVICE
COMMENTS
- ARPOLUBE 2812 IS COMPATIBLE WITH PETROLEUM COMPRESSOR LUBRICANTS. BLENDING OR MIXING WITH OTHER FLUIDS WILL REDUCE ITS HIGH PERFORMANCE CHARACTERISTICS.
- CONVERSION PROCEDURES FROM PETROLEUM PRODUCTS ARE SIMPLE, EFFECTIVE AND AVAILABLE UPON REQUEST.
- ARPOLUBE 2812 IS RECOMMENDED FOR USE WITH FLUOROCARBON (VITON), FLUOROSILICONE, POLYSULFIDE AND HIGH NITRILE BUNA-N ELASTOMERS. IT IS NOT RECOMMENDED WHERE NEOPRENE, NATURAL RUBBER, STYRENE-BUTADIENE RUBBER (SBR, BUNA-S), BUTYL RUBBER, OR LOW NITRILE BUNA-N SEALS ARE PRESENT.
SPECIFICATIONS
- 100 % SYNTHETIC COMPRESSOR LUBRICANT
- SAE 10- ISO VISCOSITY GRADE 32
- FOR ROTARY VANE AND SCREW TYPE AIR COMPRESSORS
ARPOLUBE 2850
AN SAE 30 (ISO-100), 100% SYNTHETIC COMPRESSOR LUBRICANT, FULLY FORMULATED FROM THE HIGHEST QUALITY DIESTER BASE FLUIDS. RECOMMENDED FOR USE IN BOTH CYLINDER AND CRANKCASE LUBRICATION IN RECIPROCATING COMPRESSORS WHERE A FLUID OF THIS VISCOSITY IS REQUIRED.
PERFORMANCE BENEFITS
- HIGHER COMPRESSOR EFFICIENCY
- REDUCED VALVE MAINTENANCE
- LOWER ENERGY COSTS
- LONGER LUBRICANT SERVICE LIFE
- HIGHER COMPRESSOR RELIABILITY
- SAFER COMPRESSOR OPERATION
APPLICATION
- CIRCULATING AND SPLASH LUBRICATED CRANKCASE COMPRESSOR SYSTEMS
- RINGS AND CYLINDERS OF RECIPROCATING AIR COMPRESSORS
- OIL BATCH INTAKE AIR CLEANERS
- AIR LINE OILERS SERVING VALVES/CYLINDERS ON PNEUMATIC EQUIPMENT
- SOME GEAR, BEARING, HYDRAULIC AND CHAIN APPLICATION OPERATING BEYOND PETROLEUM OIL CAPABILITIES
PRODUCT FEATURES
- CLEAN OPERATION-LOWEST DEPOSIT FORMING TENDENCIES
- EXTENDED LUBRICANT LIFE-EXCELLENT HIGH TEMPERATURE STABILITY
- LONG EQUIPMENT LIFE-SUPERIOR ANTI-WEAR PERFORMANCE
- LESS MAINTENANCE-EXCELLENT RUST AND CORROSION PROTECTION
- WIDE TEMPERATURE RANGE-HIGH FLASH AND FIRE POINTS, LOW POUR POINT
- LESS OIL CONSUMPTION-VERY LOW VOLATILITY
- FAST WATER SEPARATION-EXCELLENT DEMULSIBILITY CHARACTERISTICS
- APPROVED BY USDA FOR H-2 (FORMERLY BB) SERVICE
COMMENTS
- ARPOLUBE 2850 IS COMPATIBLE WITH PETROLEUM COMPRESSOR LUBRICANTS. BLENDING OR MIXING WITH OTHER FLUIDS WILL REDUCE ITS HIGH PERFORMANCE CHARACTERISTICS.
- CONVERSION PROCEDURES FROM PETROLEUM PRODUCTS ARE SIMPLE, EFFECTIVE AND AVAILABLE UPON REQUEST.
- ARPOLUBE 2850 IS RECOMMENDED FOR USE WITH FLUOROCARBON (VITON), FLUOROSILICONE, POLYSULFIDE AND HIGH NITRILE BUNA-N ELASTOMERS. IT IS NOT RECOMMENDED WHERE NEOPRENE, NATURAL RUBBER, STYRENE-BUTADIENE RUBBER (SBR, BUNA-S), BUTYL RUBBER, OR LOW NITRILE BUNA-N SEALS ARE PRESENT. AN ELASTOMER COMPATABILITY GUIDE IS AVAILABLE UPON REQUEST.
SPECIFICATIONS
- 100 % SYNTHETIC COMPRESSOR LUBRICANT
- SAE 30 - ISO VISCOSITY GRADE 100
- FOR RECIPROCATING AIR COMPRESSORS
ARPOLUBE 2862
AN SAE 20 (ISO-68), 100% SYNTHETIC COMPRESSOR LUBRICANT, FULLY FORMULATED FROM THE HIGHEST QUALITY DIESTER BASE FLUIDS. RECOMMENDED FOR USE IN FLOODED ROTARY VANE AND SCREW TYPE AIR COMPRESSORS WHERE A FLUID OF THIS VISCOSITY IS REQUIRED.
PERFORMANCE BENEFITS
- HIGHER COMPRESSOR EFFICIENCY
- LONGER LUBRICANT SERVICE LIFE
- REDUCED SYSTEMS DEPOSITS
- HIGHER COMPRESSOR RELIABILITY
- LOWER ENERGY COSTS
- SAFER COMPRESSOR OPERATION
APPLICATION
- CIRCULATING AND SPLASH LUBRICATED ROTARY COMPRESSOR SYSTEMS
- AIR LINE OILERS SERVING VALVES/CYLINDERS ON PNEUMATIC EQUIPMENT
- SOME GEAR, BEARING, HYDRAULIC AND CHAIN APPLICATION OPERATING BEYOND PETROLEUM OIL CAPABILITIES
PRODUCT FEATURES
- CLEAN OPERATION-LOWEST DEPOSIT FORMING TENDENCIES
- EXTENDED LUBRICANT LIFE-EXCELLENT HIGH TEMPERATURE STABILITY
- LONG EQUIPMENT LIFE-SUPERIOR ANTI-WEAR PERFORMANCE
- LESS MAINTENANCE-EXCELLENT RUST AND CORROSION PROTECTION
- WIDE TEMPERATURE RANGE-HIGH FLASH AND FIRE POINTS, LOW POUR POINT
- LESS OIL CONSUMPTION-VERY LOW VOLATILITY
- HIGH SEPARATION EFFICIENCY-EXCELLENT DEMULSIBILITY CHARACTERISTICS
- APPROVED BY USDA FOR H-2 (FORMERLY BB) SERVICE
COMMENTS
- ARPOLUBE 2862 IS COMPATIBLE WITH PETROLEUM COMPRESSOR LUBRICANTS. BLENDING OR MIXING WITH OTHER FLUIDS WILL REDUCE ITS HIGH PERFORMANCE CHARACTERISTICS.
- CONVERSION PROCEDURES FROM PETROLEUM PRODUCTS ARE SIMPLE, EFFECTIVE AND AVAILABLE UPON REQUEST.
- ARPOLUBE 2862 IS RECOMMENDED FOR USE WITH FLUOROCARBON (VITON), FLUOROSILICONE, POLYSULFIDE AND HIGH NITRILE BUNA-N ELASTOMERS. IT IS NOT RECOMMENDED WHERE NEOPRENE, NATURAL RUBBER, STYRENE-BUTADIENE RUBBER (SBR, BUNA-S), BUTYL RUBBER, OR LOW NITRILE BUNA-N SEALS ARE PRESENT. AN ELASTOMER COMPATIBILITY GUIDE IS AVAILABLE UPON REQUEST.
SPECIFICATIONS
- 100 % SYNTHETIC COMPRESSOR LUBRICANT
- SAE 20- ISO VISCOSITY GRADE 68
- FOR ROTARY VANE AND SCREW TYPE AIR COMPRESSORS
ARPOLUBE HIGH TEMP CHAIN LUBRICANT
-100% SYNTHETIC.
-WIDE TEMPERATURE RANGE.
-VIRTUALLY ELIMINATES CARBON DEPOSITS.
-EXCELLENT LOAD CARRYING AND WEAR PREVENTION PROPERTIES
-THE MOST EFFECTIVE HIGH TEMP CHAIN LUBRICANTS DEVELOPED TO DATE.
ARPOLUBE PERFLUORINATED GEAR OILS
- A COLORLESS LOW, MOLECULAR WEIGHT OIL WHICH IS INERT TO VIRTUALLY ALL CHEMICALS.
- SAFE TO USE IN INDIRECT CONTACT WITH OXIDANTS SUCH AS LOX/GOX AND CHLORINE.
- NON FLAMMABLE AND NON TOXIC
- LACTICS, AND ELASTOMERS.
ARPOLUBE HYDRASYN OILS
ARPOLUBE HYDRASYN OILS ARE AMONGST THE FINEST ANTI-WEAR SYNTHETIC HYDRAULIC FLUIDS AVAILABLE IN THE MARKET TODAY. INCORPORATING THE LATEST IN PAO AND ESTER TECHNOLOGY, THESE FLUIDS HAVE BEEN DESIGNED FOR USE IN HYDRAULIC SYSTEMS OPERATING OVER A WIDE TEMPERATURE RANGE. COMMON PETROLEUM BASED FLUIDS MAY NOT PROVIDE ADEQUATE HIGH/LOW TEMPERATURE PERFORMANCE, NOR DO THEY PROVIDE THE LEVEL OF FIRE SAFETY THAT ARPOLUBE HYDRASYN FLUIDS ARE CAPABLE OF.
APPLICATION:
ARPOLUBE HYDRASYN OILS WERE DEVELOPED SPECIFICALLY FOR USE WITH GEAR, PISTON OR VANE PUMPS OPERATING OVER A WIDE RANGE OF PRESSURES AND TEMPERATURES. THEY MEET VICKERS 104C VANE PUMP PERFORMANCE REQUIREMENTS.
IMPROVED PERFORMANCE:
APROLUBE HYDRASYN OILS WERE DESIGNED TO OPERATE OVER A WIDE RANGE OF TEMPERATURES AND PRESSURES WITH LESS CHANGE IN VISCOSITY THAN COMPARABLE PETROLEUM BASED FLUIDS. THIS RESULTS IN REDUCED ENERGY CONSUMPTION, EXTENDED PUMP LIFE AND IMPROVED OVERALL PERFORMANCE.
INCREASED SAFETY:
LOW VAPOR PRESSURE DECREASES VAPOR LOSS, REDUCES DEPOSITS AND DRAMATICALLY LOWERS FIRE HAZARD. THESE OILS HAVE EXCELLENT SEAL, JACKET AND HOSE COMPATIBILITY, AND REDUCE RISKS ASSOCIATED WITH LEAKS.
REDUCED MAINTENANCE COSTS:
ANTI-WEAR ADDITIVES REDUCE PUMP WEAR. CORROSION INHIBITORS AND EXCELLENT DEMULSIBILITY RESULT IN LONG COMPONENT LIFE. MAINTENANCE COST ARE FURTHER REDUCED AS A RESULT OF EXCEPTIONAL OXIDATION STABILITY WHICH AFFORDS FLUID LIFE U TO EIGHT TIMES THAT OF PETROLEUM OILS.
|
|
|