|
|
|
Arpolube Lubricating Oils
|
ARPOLUBE 800
U.S. MILITARY SPECIFICATION: VV-L-800C AM. 1
NATO: O-190
LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE
(WATER DISPLACING, LOW TEMPERATURE)
THIS LUBRICATING OIL WAS DEVELOPED FOR GENERAL PURPOSE PRESERVATIVE APPLICATIONS AT LOW TEMPERATURES. OIL CAN BE APPLIED BY DIPPING, BRUSHING OR SPRAYING.
ARPOLUBE 6081
U.S. MILITARY SPECIFICATION: MIL-PRF-6081D GRADE 1010
NATO: O-133
A PETROLEUM BASE JET ENGINE LUBRICATING OIL MANUFACTURED WITH A HIGHLY REFINED MINERAL OIL MEETING THE HIGHEST STANDARD OF QUALITY. AN APPROVED ANTI-OXIDANT IS USED TO ENABLE THE FINISHED PRODUCT TO MEET THE SEVERE CORROSION AND OXIDATION STABILITY REQUIREMENTS OF THE JET ENGINE.
INTENDED FOR USE IN JET ENGINE AND OTHER HIGH SPEED TURBINES WHERE A MINERAL BASED FLUID IS REQUIRED THROUGH A WIDE RANGE OF OPERATING CONDITIONS. RECOMMENDED BECAUSE OF ITS EXCELLENT LOW TEMPERATURE PROPERTIES, GOOD VISCOSITY TEMPERATURE BEHAVIOR AND RESISTANCE TO OXIDATION.
ARPOLUBE 6082 GR 1100
U.S. MILITARY SPECIFICATION: SAE J-1966
NATO: O-117
LUBRICATING OIL, AIRCRAFT PISTON ENGINE
(NON-DISPERSANT MINERAL OIL)
AN AIRCRAFT RECIPROCATING ENGINE OIL INTENDED FOR OLDER STYLE PISTON ENGINES AND FOR BLENDING WITH OILS UNDER MIL-L-22851. FOR USE WHEN A DISPERSANT ADDITIVE IS NOT REQUIRED.
ARPOLUBE 6085
U.S. MILITARY SPECIFICATION: MIL-PRF-6085D
NATO: O-147
LUBRICATING OIL: INSTRUMENT, AIRCRAFT, LOW VOLATILITY
INTENDED FOR USE IN AIRCRAFT INSTRUMENTS, ELECTRONIC EQUIPMENT OR WHERE A LOW EVAPORATION OIL IS REQUIRED FOR BOTH HIGH AND LOW TEMPERATURE APPLICATION, AND WHERE OXIDATION AND CORROSION RESISTANCE IS DESIRABLE.
ARPOLUBE 6086 GR L
U.S. MILITARY SPECIFICATION: MIL-PRF-6086E GR L
NATO: O-153
LUBRICATING OIL, GEAR, PETROLEUM BASE
INTENDED FOR USE IN LIGHT LOADED GEAR BOXES OR GEAR TRAINS THAT OPERATE IN LOW SPEED RANGES DOWN TO -40 DEGREE C. LUBRICATES GEARS WHERE HIGH TOOTH LOADINGS AND CONSTANT SPEED ALTERNATOR DRIVES EXIST. CAN BE USED IN LUBRICATION OF HELICOPTER GEAR BOXES.
ARPOLUBE 6086 GR M
U.S. MILITARY SPECIFICATION: MIL-PRF-6086E GR M
NATO: O-155
LUBRICATING OIL, GEAR, PETROLEUM BASE
INTENDED FOR USE IN LIGHT LOADED GEAR BOXES OR GEAR TRAINS THAT OPERATE IN LOW SPEED RANGES DOWN TO -40 DEGREE C. LUBRICATES GEARS WHERE HIGH TOOTH LOADINGS AND CONSTANT SPEED ALTERNATOR DRIVES EXIST. CAN BE USED IN LUBRICATION OF HELICOPTER GEAR BOXES.
ARPOLUBE 7808
U.S. MILITARY SPECIFICATION: MIL-PRF-7808K GRADE 3 and 4
NATO: O-148
A SUPERIOR TYPE 1 GAS TURBINE LUBRICANT MADE FROM POLYOL ESTER (SYNTHETIC) BASE STOCK. STATE OF THE ART ADDITIVES HAVE BEEN USED TO MAXIMIZE ANTI-WEAR OXIDATIVE STABILITY, CORROSION, AND FOAMING TENDENCY. IT OFFERS EXCELLENT ENGINE CLEANLINESS, SHEAR STABILITY AND LONG TERM STORAGE LIFE.
INTENDED FOR USE IN HIGH PERFORMANCE AIRCRAFT, AND HELICOPTER TRANSMISSIONS, ACCESSORY AND AUXILIARY EQUIPMENT AND APUs OPERATING IN THE TEMPERATURE RANGE OF -65 DEGREE F TO 350 DEGREE F.
ARPOLUBE 9000
U.S. MILITARY SPECIFICATION: MIL-L-9000H SYMBOL: 9250
NATO: O-278
A STABLE BLEND OF PETROLEUM BASE OIL STOCKS PLUS ADDITIVE AGENTS THAT ALLOW THIS PRODUCT, EVEN WHEN CONTAMINATED WITH SEA WATER, TO BE SUITABLE AS A BEARING LUBRICANT.
INTENDED FOR OIL LUBRICATED HIGH OUTPUT MARINE DIESEL ENGINE PARTS AND ENGINE DRIVEN GENERATOR BEARINGS.
ARPOLUBE 14107
U.S. MILITARY SPECIFICATION: MIL-L-14107C AM.2
NATO: 0O-157
THIS SPECIFICATION COVERS A PRESERVATIVE LUBRICATING OIL FOR AIRCRAFT AND GROUND SMALL ARMS WEAPONS AT TEMPERATURES BETWEEN 0 TO -70 DEGREE F (-17.8 DEGREE TO -56.6 DEGREE C).
ARPOLUBE 17331
U.S. MILITARY SPECIFICATION: MIL-L-17331H AM.2 SYMBOL: 2190 TEP
NATO: O-250
A VERY STABLE ZINC FREE HOMOGENEOUS BLEND OF BASE OIL STOCKS WITH A DELICATE BALANCE OF ADDITIVES DESIGNED TO MEET THE UNIQUE OXIDATION, FORM, AND EMULSION STANDARDS IMPOSED.
INTENDED USE IN STEAM TURBINE APPLICATIONS IN MAIN TURBINES AND GEARS, AUXILIARY TURBINES, CERTAIN HYDRAULIC EQUIPMENT, AIR COMPRESSORS, AND AS GENERAL MECHANICAL LUBRICATION.
ARPOLUBE 22851D GR 60
U.S. MILITARY SPECIFICATION: SAE-J-1899 SAE 60
NATO: O-128
LUBRICATING OIL FOR AIRCRAFT RECIPROCATING (PISTON) ENGINES. AN ASHLESS DISPERSANT OIL, THIS PRODUCT CONTAINS ADDITIVES TO IMPART OXIDATION STABILITY AND DISPERSANT PROPERTIES.
ARPOLUBE 23699
U.S. MILITARY SPECIFICATION: MIL-PRF-23699F GRADES STD, C/I, HTS
NATO: O-156
LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
A CAREFULLY SELECTED BLEND OF POLYOL ESTER (SYNTHETIC) BASE STOCKS AND STATE OF THE ART ADDITIVES YIELDING A LUBRICANT MEETING REQUIREMENTS OF NEARLY ALL JET ENGINE MANUFACTURERS. OUTSTANDING LUBRICITY (RYDER GEAR TEST), SUPERIOR OXIDATION RESISTANCE, AND EXCELLENT CONTROL OF CARBON, VARNISH OR SLUDGE FORMATION MAKE THIS PRODUCT ADAPTABLE TO SEVERE SERVICE APPLICATIONS.
INTENDED USE IN AIRCRAFT, SPACE TURBOPROPS, TURBOSHAFT ENGINES, HELICOPTER TRANSMISSION AND GEARS, AND STATIONARY GAS TURBINE.
IT IS DESIGNED TO OPERATE FROM -40 DEGREE F TO ABOVE 400 DEGREE F.
EXTENDED TEMPERATURE OPERATION MAY BE ACHIEVABLE UNDER SUITABLE CONDITIONS.
ARPOLUBE 46000
U.S. MILITARY SPECIFICATION: MIL-L-46000C
NATO: O-158
LUBRICANT, SEMI-FLUID, AUTOMATIC WEAPONS
THIS SPECIFICATION IS INTENDED FOR USE IN THE OPERATION OF THE M61, M39, AND RELATED TYPES OF AUTOMATIC WEAPONS UNDER CONDITIONS OF EXTREME PRESSURE IN THE TEMPERATURE RANGE OF -54 TO +127 DEGREE C.
ARPOLUBE 46167
U.S. MILITARY SPECIFICATION: MIL-L-46167B AM.1
NATO: O-183
LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ARCTIC.
THIS LUBRICATING OIL IS INTENDED FOR THE CRANKCASE LUBRICATION OF RECIPROCATING SPARK IGNITION, AND COMPRESSION IGNITION ENGINES USED IN ALL TYPES OF GROUND EQUIPMENT. THE PRODUCT IS INTENDED FOR CRANKCASE LUBRICATION UNDER ALL CONDITIONS OF SERVICE, AS DEFINDED BY APPROPRIATE LUBRICATION ORDERS, WHEN AMBIENT REGIONS AS AN ALL WEATHER, YEAR ROUND POWER TRANSMISSION FLUID FOR MILITARY TACTICAL/COMBAT GROUND EQUIPMENT.
|
|
|